You are here

Planibel A

Toughenable glass with enhanced thermal insulation

-

Planibel A is a low-emissivity hard coating which can be used in single, double and laminated glass in building applications.

Planibel A is specifically designed to balance energy savings through good thermal insulation, while enjoying free heat gains from the sun thanks to a high solar factor (SF=75%).

    Planibel A has exceptional features such as:
  • so-called fasT technology: the coating can be toughened on both sides (opposite and coating against rollers). Processing as easy as clear float (no need for convection), with toughening cycles improved by 25% vs. soft coatings
  • one single version: Planibel A may be toughened or not. It also can be used in single glazing, double glazing or laminated glass.
  • mechanical resistance: improved resistance to scratches (no need for cover sheet), no edge deletion, much longer shelf life (when compared to a soft coating)
Structure % % % % % W/(M².K)
Planibel A τv ρv αe g SC Ug-Value
4 - 15 Ar 90% - |4 73 17 24 75 0.86 1.3
4 - 16 Ar 90% - |4 72 17 26 73 0.83 1.4
4 - 16 Ar 90% - |4 74 17 20 78 0.89 1.4
4 - 20 Ar 90% - |4 72 17 26 73 0.83 1.4
4 - 20 Ar 90% - |4 74 17 20 78 0.89 1.4

Abbreviations:
LT: Light Transmission; LR: Light Reflection; UV: Ultraviolet transmission; EA: Energy Absorption; SF: Solar Factor.

Symbols:

  • The | symbol indicates the position of the solar-control coating.
  • The ¦ symbol indicates the position of a low-emissivity coating (iplus Top 1.1).
  • The ! Symbol indicates the position of a low-emissivity coating (Planibel G)

Tolerances:
The data are calculated using spectral measurements that are conform to standards EN 410 (1998).
The tolerance of published data with respect to photometric properties is +/- 3 points.
The U-value (formerly k-value) is calculated according to standard EN 673.
The emissivity measurement complies with standards EN 673 (Annex A) and EN 12898. The U-value tolerance is +/- 0.1W/(m²K).
This information is no evaluation of the risk of glass breakage due to thermal stress.

No document available.
POCKET VALUES
EN
Download
CE MARKING - DOP
PLANIBEL G TDS
No document available.