You are here
Ultra-60T on Clearvision
First toughenable glass with a triple silver coating
Stopray Ultra-60T on Clearvision is AGC’s first toughenable coating to offer a selectivity greater than 2.2.
This remarkable technological advance provides architects with a glass that maximises natural light whilst minimising solar heat gain. Moreover, its low reflection makes it aesthetically appealing.
Stopray Ultra-60T on Clearvision is aesthetically similar to its non-temperable counterpart, Ultra-60 on Clearvision.
This coating must be heat-treated to reach its final performances and aesthetics.
|Ultra-60T on Clearvision||τv||ρv||αe||g||SC||Ug-Value|
|6| - 16 Ar 90% - 4||62||13||35||30||0.34||1.0|
LT: Light Transmission; LR: Light Reflection; UV: Ultraviolet transmission; EA: Energy Absorption; SF: Solar Factor.
- The | symbol indicates the position of the solar-control coating.
- The ¦ symbol indicates the position of a low-emissivity coating (iplus Top 1.1).
- The ! Symbol indicates the position of a low-emissivity coating (Planibel G)
The data are calculated using spectral measurements that are conform to standards EN 410 (1998).
The tolerance of published data with respect to photometric properties is +/- 3 points.
The U-value (formerly k-value) is calculated according to standard EN 673.
The emissivity measurement complies with standards EN 673 (Annex A) and EN 12898. The U-value tolerance is +/- 0.1W/(m²K).
This information is no evaluation of the risk of glass breakage due to thermal stress.